GESTIÓN DE LA PRODUCCIÓN: EVOLUCIÓN Y TENDENCIAS DE INVESTIGACIÓN
Resumen
La gestión de la producción es un tema progresivamente relevante para el sector industrial, constituido como una ventaja empresarial al integrar actividades descentralizadas fundamentales para los procesos. Las organizaciones logran optimizar sus recursos productivos y ser potencialmente sostenibles en un mundo donde la competencia es cada vez más fuerte y globalizada al incorporar mecanismos de gestión productiva. El presente estudio presenta una revisión sistemática de literatura sobre la gestión de la producción, empleando instrumentos y métodos bibliométricos. Se implementó la base de datos Scopus para la exploración bibliográfica publicada entre los años 2000 y 2021. Los resultados obtenidos fueron procesados utilizando las herramientas Bibliometric, Software R y Gephi. Los documentos fueron clasificados aplicando la metáfora del árbol, la cual, los ordena por medio de tres categorías, clásicos, estructurales y recientes, estos últimos permiten identificar las perspectivas de investigación, las cuales abordan temas como, los métodos de eficiencia energética aplicados a procesos de producción, técnicas para los sistemas de distribución en la producción y técnicas de difusión. Por último, se presenta una agenda para futuras investigaciones.
Citas
Y. Cui, S. Cao, Z. Cao, T. Han, and K. Gao, Development and Design of Production Management System, vol. 631. Institute of Physics Publishing, 2019.
T. Saßmannshausen, P. Burggräf, J. Wagner, M. Hassenzahl, T. Heupel, and F. Steinberg, “Trust in artificial intelligence within production management an exploration of antecedents,” Ergonomics, pp. 1–18, 2021.
A. Rácz-Szabó, T. Ruppert, L. Bántay, A. Löcklin, L. Jakab, and J. Abonyi, “Real-Time Locating System in Production Management,” Sensors, vol. 20, no. 23, doi: 10.3390/s20236766. 2020.
B. Abner, R. J. Rabelo, S. P. Zambiasi, and D. Romero, “Production Management as-a-Service: A Softbot Approach,” in IFIP Advances in Information and Communication Technology, Cham: Springer International Publishing, pp. 19–30. 2020.
D. Yasuda, E. Morinaga, and H. Wakamatsu, “A Method of Distributed Production Management for Highly-Distributed Flexible Job Shops,” in IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2020, vol. 592 IFIP, Lalic B., Marjanovic U., Majstorovic V., von Cieminski G., and Romero D., Eds. Springer, pp. 485–492. 2020.
D. Romero et al., “Advances in Production Management Systems: Issues, Trends, and Vision Towards 2030,” in Advancing Research in Information and Communication Technology: IFIP’s Exciting First 60+ Years, Views from the Technical Committees and Working Groups, M. Goedicke, E. Neuhold, and K. Rannenberg, Eds. Cham: Springer International Publishing, pp. 194–221. 2021.
A. Lobanova and M. V. Tulenkov, “Social-and- Economic Order of Organizational Interaction in the Systems of Production Management,” Management Systems in Production Engineering, vol. 27, no. 2, pp. 93–99, Jun. 2019.
A. A. H. Ahmadini, U. M. Modibbo, A. A. Shaikh, and I. Ali, “Multi-objective optimization modelling of sustainable green supply chain in inventory and production management,” Alex. Eng. J., vol. 60, no. 6, pp. 5129–5146, 2021.
L. V. Strelkova, D. I. Tarasov, J. A. Makusheva, O. V. Trofimov, and V. P. Kuznetsov, “The tools of sustainable development of industrial production management,” in Advances in Intelligent Systems and Computing, Cham: Springer International Publishing, pp. 480–487. 2019.
M. Sarkar and B. Sarkar, “Optimization of Safety Stock under Controllable Production Rate and Energy Consumption in an Automated SmartProduction Management,” Energies, vol. 12, no. 11, p. 2059, 2019.
R. de Campos and J. de S. Rodrigues, “Exploring a BPMS system for learning production management with simulation of manufacturing scenarios,” doi: 10.5281/ZENODO.5095596. 2021.
R. Joppen, S. Von Enzberg, A. Kuhn, and R. Dumitrescu, A practical Framework for the Optimization of Production Management Processes, vol. 33. Elsevier B.V., 2019.
A. V. Litvinova, A. V. Gorbunova, and E. O. Litvinov, “Improvement of procedural approach to the production management at industrial enterprises,” IOP Conf. Ser. Mater. Sci. Eng., vol. 483, p. 012009, 2019.
J. A. O’suilivan, College students understanding of production management and master production schedule through using a real world tool, complimented with company tours and in- Class visits, provides an excellent learning experience at farmingdale state college. International Institute of Informatics and Systemics, IIIS, 2015.
E. Katsanos and A. Bitos, “Methods of Industrial Production Management: A Critical Review,” vol. 1, http: //dx.doi.org/. 2009.
A. dos Santos, J. A. Powell, and M. Sarshar, “Evolution of management theory: the case of production management in construction,” Manag. decis., vol. 40, no. 8, pp. 788–796, Oct. 2002.
E. Katsanos, “Industrial Production Management: Tendencies and Reflections,” WSEAS TRANSACTIONS on BUSINESS and ECONOMICS, doi: EISSN: 2224-2899. 2012.
P. Burggräf, J. Wagner, and B. Koke, “Artificial intelligence in production management: A review of the current state of affairs and research trends in academia,” in 2018 International Conference on Information Management and Processing (ICIMP), pp. 82–88. 2018.
S. Robledo, G. Osorio, and C. Lopez, “Networking en pequeña empresa: una revisión bibliográfica utilizando la teoria de grafos,” Vinculos, vol. 11, no. 2, pp. 6–16, 2014.
H. D. S. Valencia, S. Robledo, R. Pinilla, M. N. D. Duque, and O. T. Gerard, “SAP Algorithm for Citation Analysis: An improvement to Tree of Science,” Ing. Inv., vol. 40, no. 1, pp. 45–49, 2020.
I. Zupic and T. ?ater, “Bibliometric Methods in Management and Organization,” Organizational Research Methods, vol. 18, no. 3, pp. 429–472, 2015.
J. Bar-Ilan, “Which h-index? — A comparison of WoS, Scopus and Google Scholar,” Scientometrics, vol. 74, no. 2, pp. 257–271, 2008.
J. Zhu and W. Liu, “A tale of two databases: the use of Web of Science and Scopus in academic papers,” Scientometrics, vol. 123, no. 1, pp. 321–335, 2020.
M. Aria and C. Cuccurullo, “bibliometrix: An Rtool for comprehensive science mapping analysis,” J. Informetr., vol. 11, no. 4, pp. 959–975, 2017.
J. P. Acevedo, S. Robledo, and M. Z. Sepúlveda, “Subáreas de internacionalización de emprendimientos: una revisión bibliográfica,” Econ. CUC, vol. 42, no. 1, pp. 249–268, 2020.
P. Duque, D. Trejos, O. Hoyos, and J. C. Chica, “Finanzas corporativas y sostenibilidad: un análisis bibliométrico e identificación de tendencias,” Semestre Económico, vol. 24, no. 56, pp. 25–51, 2021.
P. Duque, V. Samboni, M. Castro, L. A. Montoya, and I. A. Montoya, “Neuromarketing: Its current status and research perspectives,” Estudios Gerenciales, vol. 36, no. 157, doi: 10.18046/j.estger.2020.157.3890. 2020.
M. Aria, M. Misuraca, and M. Spano, “Mapping the Evolution of Social Research and Data Science on 30 Years of Social Indicators Research,” Soc. Indic. Res., vol. 149, no. 3, pp. 803–831, 2020.
M. Tani, O. Papaluca, and P. Sasso, “The System Thinking Perspective in the Open-Innovation Research: A Systematic Review,” JOItmC, vol. 4, no. 3, p. 38, 2018.
F. Demiroz and T. W. Haase, “The concept of resilience: a bibliometric analysis of the emergency and disaster management literature,” Local Government Studies, vol. 45, no. 3, pp. 308–327, 2019.
M. Bond, O. Zawacki-Richter, and M. Nichols, “Revisiting five decades of educational technology research: A content and authorship analysis of the British Journal of Educational Technology,” Br. J. Educ. Technol., vol. 50, no. 1, pp. 12–63, 2019.
W. D. Wallis, A Beginner’s Guide to Graph Theory. Birkhäuser Boston, 2007.
S. Yang, F. B. Keller, and L. Zheng, Social Network Analysis: Methods and Examples. SAGE Publications, 2016.
L. C. Freeman, “A Set of Measures of Centrality Based on Betweenness,” Sociometry, vol. 40, no. 1, p. 35, 1977.
J. Zhang and Y. Luo, “Degree Centrality, Betweenness Centrality, and Closeness Centrality in Social Network,” in Proceedings of the 2017 2nd International Conference on Modelling, Simulation and Applied Mathematics (MSAM2017), pp. 300–303. 2017.
S. Buitrago, P. Duque, and S. Robledo, “Branding Corporativo: una revisión bibliográfica,” Económicas CUC, vol. 41, no. 1, doi: 10.17981/econcuc.41.1.2020.Org.1. 2020.
P. Duque and L.-S. Cervantes-Cervantes, “Responsabilidad Social Universitaria: una revisión sistemática y análisis bibliométrico,” Estudios Gerenciales, pp. 451–464, 2019.
P. Duque, O. Meza, G. Zapata, and J. Giraldo, “Internacionalización de empresas latinas: evolución y tendencias,” ECONÓMICAS CUC, vol. 42, no. 1, doi: 10.17981/econcuc.42.1.2021.Org.1. 2021.
J. E. Hernandez, I. Montoya, and L. A. Montoya, “The tree of science of deliberate and emergent strategies,” IIMB Management Review, vol. 32, no. 4, pp. 413–433, 2020.
V. Ramos, P. Duque, and J. A. Vieira, “Responsabilidad Social Corporativa y Emprendimiento: evolución y tendencias de investigación,” DESARROLLO GERENCIAL, vol. 13, no. 1, pp. 1–34, 2021.
P. Duque, A. Toro, D. Ramírez, and M. E. Carvajal, “Marketing viral: Aplicación y tendencias,” Clío América, vol. 14, no. 27, pp. 454–468, 2020.
P. Duque, O. E. Meza, D. Giraldo, and K. Barreto, “Economía Social y Economía Solidaria: un análisis bibliométrico y revisión de literatura,” REVESCO. Revista de Estudios Cooperativos, vol. 138, pp. e75566–e75566, 2021.
D. F. Trejos-Salazar, P. L. Duque, L. A. Montoya, and I. A. Montoya, “Neuroeconomía: una revisión basada en técnicas de mapeo científico,” REVISTA DE INVESTIGACIÓN, DESARROLLO E INNOVACIÓN, vol. 11, no. 2, pp. 243–260, 2021.
N. Zuschke, “An analysis of process-tracing research on consumer decision-making,” J. Bus. Res., vol. 111, pp. 305–320, 2020.
H. Gurzki and D. M. Woisetschläger, “Mapping the luxury research landscape: A bibliometric citation analysis,” J. Bus. Res., vol. 77, pp. 147–166, 2017.
M. Bastian, S. Heymann, and M. Jacomy, “Gephi: an open source software for exploring and manipulating networks,” https: //www.aaai.org/ocs/index.php/ICWSM/09/paper/viewPaper/154. 2009.
V. D. Blondel, J.-L. Guillaume, R. Lambiotte, and E. Lefebvre, “Fast unfolding of communities in large networks,” J. Stat. Mech., vol. 2008, no. 10, p. P10008, 2008.
Smith, “The Contract Net Protocol: High-Level Communication and Control in a Distributed Problem Solver,” IEEE Trans. Comput., vol. C–29, no. 12, pp. 1104–1113, 1980.
H.-P. Wiendahl et al., “Changeable Manufacturing- Classification, Design and Operation,” CIRP Ann., vol. 56, no. 2, pp. 783–809, 2007.
O. Tatari, D. Castro-Lacouture, and M. J. Skibniewski, “Current state of construction enterprise information systems: survey research,” Constr. Innov., vol. 7, no. 4, pp. 310–319, 2007.
P. R. Kleindorfer, K. Singhal, and L. N. Wassenhove, “Sustainable operations management,” Prod. Oper. Manag., vol. 14, no. 4, pp. 482–492, 2009.
P. Rohdin and P. Thollander, “Barriers to and driving forces for energy efficiency in the nonenergy
intensive manufacturing industry in Sweden,” Energy, vol. 31, no. 12, pp. 1836–1844, 2006.
W. Karwowski and R. W. Evans, “Fuzzy concepts in production management research: a review,” International Journal of Production Research, vol. 24, no. 1. pp. 129–147, doi: 10.1080/00207548608919718. 1986.
A. L. Guiffrida and R. Nagi, J. Intell. Manuf., vol. 9, no. 1, pp. 39–56, 1998.
H.-J. rg Bullinger, “Turbulent times require creative thinking: New European concepts in production management,” Int. J. Prod. Econ., vol. 60–61, pp. 9–27, 1999.
R. Sacks, M. Radosavljevic, and R. Barak, “Requirements for building information modeling based lean production management systems for construction,” Autom. Constr., vol. 19, no. 5, pp. 641–655, 2010.
K. Bunse, M. Vodicka, P. Schönsleben, M. Brülhart, and F. O. Ernst, “Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature,” Journal of Cleaner Production, vol. 19, no. 6–7. pp. 667– 679, doi: 10.1016/j.jclepro.2010.11.011. 2011.
V. Veleva and M. Ellenbecker, “Indicators of sustainable production: framework and methodology,” J. Clean. Prod., vol. 9, no. 6, pp. 519–549, 2001.
J. Rezende and J. Cosgrove, “A case study on the analysis of an injection moulding machine energy data sets for improving energy and production management”. 2018.
X. Wen, H. Cao, B. Hon, E. Chen, and H. Li, “Energy value mapping: A novel lean method to integrate energy efficiency into production management,” Energy, vol. 217, p. 119353, 2021.
B. W. Ang, “Monitoring changes in economy-wide energy efficiency: From energy–GDP ratio to composite efficiency index,” Energy Policy, vol. 34, no. 5, pp. 574–582, 2006.
S. Arai, H. Hibino, T. Horikawa, and M. Yamaguchi, “Formalising specific-energy consumption under a production-management form where rush orders are added in time slots,” in IFIP Advances in Information and Communication Technology, Cham: Springer International Publishing, pp. 50–57. 2018.
Y. He, B. Liu, X. Zhang, H. Gao, and X. Liu, “A modeling method of task-oriented energy consumption for machining manufacturing system,” J. Clean. Prod., vol. 23, no. 1, pp. 167–174, 2012.
L. B. Christoffersen, A. Larsen, and M. Togeby, “Empirical analysis of energy management in Danish industry,” J. Clean. Prod., vol. 14, no. 5, pp. 516–526, 2006.
M. Li and W. Du, “Can Internet development improve the energy efficiency of firms: Empirical evidence from China,” Energy, vol. 237, p. 121590, 2021.
A. Fetanat, E. Khorasaninejad, and G. Shafipour, “Energy security-based game theoretic approach
for strategies selection in climate risk and energy resources management: a case study of Iran,” International Journal of Energy and Environmental Engineering, vol. 12, no. 4, pp. 705–723, 2021.
E. Altintas and Z. Utlu, “Planning energy usage in electricity production sector considering environmental impacts with fuzzy TOPSIS method & game theory,” Cleaner Engineering and Technology, vol. 5, p. 100283, 2021.
R. G. S. Randall Davis, “Negotiation as a metaphor for distributed problem solving,” Artif. Intell., vol. 20, no. 1, pp. 63–109, 1983.
K. Hadavi, M. S. Shahraray, and K. Voigt, “ReDS— A dynamic planning, scheduling, and control system for manufacturing,” Journal of ManufactuSystems, vol. 9, no. 4, pp. 332–344. 1990.
L. J.-S. y Sycara KP, “Coordination of multiple agents for production management,” Annals of Operations Research 75(1997)235–289, doi: 10.1023/A: 1018911613698. 1997.
H.-K. Tönshoff, I. Seilonen, G. Teunis, and P. Leitão, “A mediator-based approach for decentralised production planning, scheduling and monitoring,”CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, pp. 113–118, 2000.
L. He, Z.-H. Wang, and K.-L. Zhang, “Production management modelling based on MAS,” Int. J. Autom. Comput., vol. 7, no. 3, pp. 336–341, 2010.
A. Stawowy, J. Duda, and R. Wrona, “Applicability of business rules to production management in foundries,” Arch. Foundry Eng., vol. 16, no. 1, pp. 85–88, 2016.
M. Rostami, S. Nikravesh, and M. Shahin, “Minimizing total weighted completion and batch delivery times with machine deterioration and learning effect: a case study from wax production,” Oper. Res., vol. 20, no. 3, pp.1255–1287, 2020.
M. Momenitabar, Z. D. Ebrahimi, S. H. Hosseini, and M. Arani, “A proposed lean distribution system for solar power plants using mathematical modeling and simulation technique,” presented at the 2020 International Conference on Decision Aid Sciences and Application (DASA), Sakheer, Bahrain, doi:10.1109/dasa51403.2020.9317257.2020.
G. Gokilakrishnan, S. Ganeshkumar, H. Anandakumar, and M. Vigneshkumar, “A critical review of production distribution planning models,” presented at the 2021 7th International Conference on Advanced Computing and Communication Systems (ICACCS), Coimbatore, India, doi: 10. 1109/icaccs51430.2021.9441879. 2021.
H. Zhou, C. Yang, and Y. Sun, “Intelligent Ironmaking Optimization Service on a Cloud Computing Platform by Digital Twin,” Proc. Est. Acad. Sci. Eng., vol. 7, no. 9, pp. 1274–1281, 2021.
L. Chen and S. Liaw, “Investigating resource utilization and product competence to improve production management: An empirical study,” Int. J. Oper. Prod. Manage., vol. 39, p. 88, 2001.
L. Chen and S. Liaw, “Measuring performance via production management: a pattern analysis,” International Journal of Productivity and Performance Management, vol. 39, p. 88, 2006.
Chen Kao Kuo Jang, “Productivity diagnosis via fuzzy clustering and classification: An application to machinery industry,” Omega, vol. 24, no. 3, pp. 309–319, 1996.
J. Metzman, L. Szekeres, L. Simon, R. Sprabery, and A. Arya, “FuzzBench: an open fuzzer benchmarking platform and service,” Proceedings of the 29th ACM Joint Meeting on European Software Engineering Conference and Symposium on the Foundations of Software Engineering. doi: 10.1145/3468264.3473932. 2021.
D. S. Fowler, J. Bryans, S. A. Shaikh, and P. Wooderson, “Fuzz testing for automotive cybersecurity,” presented at the 2018 48th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops (DSNW), Luxembourg, doi: 10.1109/dsn-w.2018.00070. 2018.
P. Biber, F. Schwaiger, W. Poschenrieder, and H. Pretzsch, “A fuzzy logic-based approach for evaluating forest ecosystem service provision and biodiversity applied to a case study landscape in Southern Germany,” Eur. J. For. Res., vol. 140, no. 6, pp. 1559–1586, 2021.
J. P. Lindner, U. Eberle, E. Knuepffer, and C. R. V. Coelho, “Moving beyond land use intensity types: assessing biodiversity impacts using fuzzy thinking,” Int. J. Life Cycle Assess., vol. 26, no. 7, pp. 1338–1356, 2021.
B. Orazbayev et al., “Sustainable Waste Management Drilling Process in Fuzzy Environment,” Sustain. Sci. Pract. Policy, vol. 11, no. 24, p. 6995, 2019.
H. Taghizadeh, A. Bazrkar, and M. Abedzadeh, “Optimization Production Planning Using Fuzzy Goal Programming Techniques,” Modern Applied Science, vol. 9, no. 9, p. 68, 2015.
D. Mafi-Gholami, S. Pirasteh, J. C. Ellison, and A. Jaafari, “Fuzzy-based vulnerability assessment of coupled social-ecological systems to multiple environmental hazards and climate change,” J. Environ. Manage., vol. 299, p. 113573, 2021.
Derechos de autor 2022 Revista Ingeniería, Matemáticas y Ciencias de la Información
Esta obra está bajo licencia internacional Creative Commons Reconocimiento 4.0.
